Publish Time: 2024-09-02 Origin: Site
1. Conveyor belt
Use non-corrosive detergent to clean, do not use organic solvents to clean the conveyor belt, do not drip into the instrument when cleaning.
2, light source part
The optical part is scanned above the reagent belt, which is easy to be gradually dirty, and should be cleaned regularly, first remove the optical part, and then wipe the optical part with soft wet gauze. Note: Do not vigorously open the optical part of the lid, do not apply external force to the optical part.
3. Inside the instrument
The inner part of the instrument is mainly composed of an inner shell and a circuit. The inner shell generally has dust and urine crystals, which can be wiped off with a slightly wet gauze, and the circuit can be cleaned with anhydrous alcohol.
4. Printer
The printer has a life span, and it is necessary to regularly observe whether the gear is scratched or worn.
5. Display
Due to temperature, power supply voltage changes, or other factors, the LCD may not be able to write or display writing that is too light or too black. Adjustable display depth. Pay attention to regularly wipe the surface dust, do not hit the display with hard objects.
6. Test strips
Put the test strip in a closed jar with moisture absorbent. Do not let the test strip get wet.